CO2 SYSTEMS: CO2 is most likely the gaseous extinguishing agent that has the greatest number of installations worldwide. Its accumulated experience facilitates the engineering of a large number of applications which have become standard, such as electrical generators, transformer stations, etc
CLEAN AGENTS: The SIEX-HC™ clean agent systems offer the highest efficiency for the most diverse hazard areas. All components, from the cylinder banks to the nozzles, are developed to the highest quality assurance standards. Halocarbon gases works by TOTAL FLOODING, with discharges occurring within a few seconds.
It functions primarily through the instantaneous decrease in temperature of the protected room. The drastic removal of heat causes radical fire suppression.
INERT AGENTS: INERT-SIEX™ clean agent systems are made up of gases found in the atmosphere and are therefore completely environmentally friendly. They work by completely flooding the room, reducing the oxygen content necesary for combustion, but at the same time ensuring adequate oxygen concentrations for use in occupied areas.
They can work at pressures up to 300 bar (4350psi), providing savings in the installation cost. We also have 200 bar (2900psi) systems, depending on the volume / concentration needs. Thanks to the use of calibrated restrictors which reduce the pressure, conventional schedule pipes can be used. This system is specifically designed for installations with longer distance pipe runs.